Dólar R$
0,00
Euro R$
0,00
Ouro R$
0,00

Projected Progesso

Mortars

With investments in the pursuit for solutions which offer products able to provide efficiency, economy, durability and beauty to every kind of work in civil construction, we have a full mortar line. 

One differential of mortars produced by Provale comes from its industrial sand extracted from white natural calcium carbonate in its deposits located in the State of Espírito Santo. All of this sand extraction and production processes are in agreement with strict-required environmental standards.

Our mortar line based on cement is composed by specific products to meet each constructive function. Oriented for settling, inner and outer coating (manual and projected) and subfloor.  In addition, we have a projected mortar line based on plaster oriented to inner coating.

Progesso Projected

 

IIt is a fine finish based on gypsum Hemidrato ß imported additives and special loads applied by an appropriate sprayable machine. Suitable for internal coatings whose surfaces have been built with concrete, ceramic block, concrete block, gypsum precast, and others.

Chemical Composition:
» Calcium Hemihydrate (CaSO4½H²O);
»Hydrated lime (Ca (OH)²).
»Double carbonate of calcium and magnesium (CaCO3 MgCO3).
» Imported additives.

Density after drying
» 0,850 - 1,0 (kg/m³).

Adhesion Resistance tensile strength after 28 days
» In the pullout of ceramic blocks, greater than or equal to 0.35 MPa.

Axial compressive strength after 28 days:
» Dry 4.0 to 6.0 MPa.

Preparation / application: 
» For every 1kg of the product add 0.42 liters of water. It can vary according to desired consistency by applicator;
» When preparing small amounts of material, it can be mixed manually or using a portable mixer;
» In case of larger amounts, it must be used the spray machine; » The application requires the use of trained professionals, both in machine operation, such as the use of rulers, squares and other accessories; 
» The projection allows 2.5 cm per layer. Wishing to obtain greater thicknesses, we advise multiple layers, however, it is recommended to wait 1 day for each layer applied.

Production and productivity:
» The daily production of a team of five professionals, using a spray machine, can reach 300m².

Yield:
» Approximately 11.5 kg/m²/cm thick.

Embalagem:
» 40kg bag.

- Validity:
» 45 days after the date of manufacture printed on the package.

OBS.: This product meets the specified performance characteristics by NBR 7200.

» Sprayable;
» Sprayable;
» Guarantees a slightly alkaline pH, preventing the oxidation (rust) of metallic materials (nails, wire) applied on the surfaces; 
» Decreased solubility;
» Constant time application;
» Very low waste;
» Excellent finish;
» Eliminates a coat of plaster, making the paint job very easy and can get all kinds of paint, and various coatings.

It is a thin coating Hemidrato ß gypsum based, imported additives and special loads applied by an appropriate spray machine. Suitable for internal coatings whose surfaces have been built with concrete, ceramic block, concrete block, precast gypsum, among others.

Chemical Composition:
» Calcium Hemihydrate (CaSO4½H²O);
» Hydrated lime (Ca(OH)²). ;
» Double carbonate of calcium and magnesium (CaCO3 MgCO3);
» Imported additives.

Density after drying:
» from 0.850 to 1.0 (kg/m³).

Resistance tensile adhesion after 28 days:
» The pullout of ceramic blocks, greater than or equal to 0.35 MPa.

Resistance to axial compression after 28 days:
» Dry 4.0 to 6.0 MPa.

Preparation / application:
» For every 1kg of the product add 0.42 liters of water. It can vary according to desired consistency by applicator;
» When preparing small amounts of material, it can be mixed manually or using a portable mixer;
» In case of larger amounts, it must be used the spray machine; » A aplicação demanda a utilização de profissionais treinados, tanto na operação da máquina, como no uso de réguas, esquadros e demais acessórios;
» The application requires the use of trained professionals, both in machine operation, such as the use of rulers, squares and other accessories.
» The projection allows 2.5 cm per layer. Wishing to obtain greater thicknesses, we advise multiple layers, however, it is recommended to wait 1 day for each layer applied

 

Production and productivity:
» The daily production of a team of five professionals, using a spray machine, can reach 300m².

Yield:
» Approximately 12.5 kg/m²/cm thick.

Packaging:
» 40kg bag.

- Validity:
» 45 days after the date of manufacture printed on the package.

OBS.: This product meets the specified performance characteristics by NBR 7200.

» Sprayable;
» Sprayable;
» Guarantees a slightly alkaline pH, preventing the oxidation (rust) of metallic materials (nails, wire) applied on the surfaces;
» Decreased solubility;
» Constant time application;
» Very low waste;
» Excellent finish;
» Eliminates a coat of plaster, making the paint job very easy and can get all kinds of paint, and various coatings.

HEAD OFFICE

+55 27 3145 2200

Avenida Nossa Senhora dos Navegantes, 955,

Sala: 601 e 602 | Enseada do Suá

Vitória/ES - Brasil | 29.050-335

 

Tecnologia: