Dólar R$
0,00
Euro R$
0,00
Ouro R$
0,00

Proarga Plus

Mortars

With investments in the pursuit for solutions which offer products able to provide efficiency, economy, durability and beauty to every kind of work in civil construction, we have a full mortar line. 

One differential of mortars produced by Provale comes from its industrial sand extracted from white natural calcium carbonate in its deposits located in the State of Espírito Santo. All of this sand extraction and production processes are in agreement with strict-required environmental standards.

Our mortar line based on cement is composed by specific products to meet each constructive function. Oriented for settling, inner and outer coating (manual and projected) and subfloor.  In addition, we have a projected mortar line based on plaster oriented to inner coating.

Proarga Plus

It is a mortar based on Portland cement, special aggregates and imported additives. Suitable for laying concrete blocks, solid bricks and ceramic blocks, both indoors, and outdoors. Also indicated for wedging.

Composição química:
» Portland Cement;
» Filler Limestone;
» Industrialized Carbonated Sand (CaCO3 MgCO3);
» Special imported additives.

Resistance to axial compression after 28 days:
» 1 to 3 MPa;

Preparation / Application:
» Add 6.5 to 7 liters of water per 40kg bag;
» Vary the amount of water according to desired consistency.

Packaging: » Bag of 40kg.

Validity:
» 90 days after the date of manufacture printed on the package.

 

» High productivity;
» Save time and manpower;
» Just add water.
 

It is a mortar based on Portland cement, special aggregates and imported additives. Shown to regulate floors and ceilings, providing the basis for subsequent settlement of ceramic tile, stone, carpet or wood, both indoors and outdoors.

Chemical Composition:
» Portland Cement;
» Filler Limestone;
» Industrialized carbonated sand (CaCO3 MgCO3);
» Special additives.

Resistance to axial compression after 28 days:
» 10 MPa.

Yield:
» Approximately 20kg/m²/cm thick.

Preparation /application:
» Add 3.7 to 4 liters of water per 40kg bag;
» Vary the amount of water according to desired consistency.

Packaging: » Bag of 40kg.

Validity:
» days after the date of manufacture printed on the package.

» High productivity;
» Save time and manpower;
» Just add water.

It is a ready-to-use mortar based on Portland cement, special aggregates and imported additives. Suitable for laying masonry, coatings for internal and external walls, roofs and façades, whose surfaces have been built with concrete, ceramic block, concrete block or roughcast.

Chemical Composition:
» Portland Cement;
» Filler Limestone;
» Industrialized carbonated sand (CaCO3 MgCO3);
» Special imported additives.

Resistance tensile adhesion after 28 days:
» INTERNAL and EXTERNAL STUCCO: greater than or equal to 0.3 MPa;

Preparation / application:
» INTERNAL and EXTERNAL PLASTER: Add about 8 liters of water per 50kg bag;
» Vary the amount of water according to desired consistency.

Yield:
» Approximately 17kg/m²/cm thick.

Packaging:
» Bag of 50kg.

Validity:
» 90 days after the date of manufacture printed on the package.

» High productivity;
» Save time and manpower;
» High adhesion;
» Excellent finishing (Internal plaster);
» High adhesion (external plaster);
» Great result;
» Just add water

It is a sprayable ready-to-use mortar based on Portland cement, hydrated lime, special aggregates and imported additives. Suitable coatings for internal and external walls, roofs and façades whose surfaces have been built with concrete, ceramic block, concrete block or roughcast. - High adhesion; - Just add water.

Chemical Composition:
» Portland Cement;
» Filler Limestone ;
» Industrialized carbonated sand (CaCO3 MgCO3) ;
» Special imported additives.

Resistance tensile adhesion after 28 days:
» EXTERNAL STUCCO: greater than or equal to 0.3 MPa;

Resistance to axial compression after 28 days:
» EXTERNAL STUCCO: 4 TO 6 MPa;

Preparation / application:
» EXTERNAL STUCCO: Add about 7 liters of water per 40kg bag;
» Vary the amount of water according to desired consistency.

Yield:
» Approximately 17kg/m²/cm thick.

Packaging:
» Bag of 40kg.

Validity:
» 90 days after the date of manufacture printed on the package.

» High productivity;
» Save time and manpower;
» High adhesion;
» Excellent finishing (Internal plaster);
» High adhesion (external plaster) » Just add water.

It is a ready-to-use mortar based on Portland cement, special aggregates and imported additives. Suitable coatings for internal and external walls, roofs and façades whose surfaces have been built with concrete, ceramic block, concrete block or roughcast.

Chemical Composition:
» Portland Cement;
» Filler Limestone ;
» Industrialized carbonated sand (CaCO3 MgCO3);
» Special imported additives.

Resistance tensile adhesion after 28 days:
» EXTERNAL STUCCO: greater than or equal to 0.3 MPa;

Resistance to axial compression after 28 days:
» INTERNAL STUCCO: 3 TO 5 MPa;
» EXTERNAL STUCCO: 4 to 6 MPa.

Preparation / application:
» EXTERNAL and INTERNAL STUCCO: Add about 7 liters of water per 40kg bag; ;
» Vary the amount of water according to desired consistency.

Yield::
» Aproximadamente 17kg/m²/cm de espessura.

Embalagem:
» Bag of 40kg.

Validity:
» 90 days after the date of manufacture printed on the packagem.

» High productivity;
» Save time and manpower;
» High adhesion;
» High adhesion (external plaster) ;
» Excellent finishing (Internal plaster);
» just add water;

HEAD OFFICE

+55 27 3145 2200

Avenida Nossa Senhora dos Navegantes, 955,

Sala: 601 e 602 | Enseada do Suá

Vitória/ES - Brasil | 29.050-335

 

Tecnologia: